Best Router table 2016. Find our Router table reviews, comparison charts and buying guides to help you buy the right router table for your woodworking needs.
If you’re looking for the best router table out in terms of performance and precision then our top recommendation would be Kreg PRS1045 Precision Router Table System
However, if you’re on a budget and looking for something that gives you the best bang for your buck then our top pick is Bosch RA1181 Benchtop Router Table
Looking for the right router table that is compatible with your router, has a large table surface and fence to work with workpieces of different size, a great mounting plate and gives you the best bang for your buck?
Then you’re at the right place. We reviewed over 25 router tables and rate the best router table for your woodworking needs and budget.
However, after months of testing and building all kind of things, we’ve shortlisted the top 5 router tables that offer just great performance, safety and features needed for a smooth workflow.
Planning to build complex projects? You need a table that is well designed, sturdy and precise. Here are our top two recommendations that deliver just that.
Just getting started with Woodworking? Well, here are two budget friendly router tables that are perfect for you.
Kreg PRS1045 Precision Router Table System - #1 Recommendation
Hands down the best Router table out there.(Read Full Review Below)
BenchDog 40-102 ProMax Cast Iron - #2 Recommendation
Need Something Solid, durable and affordable?
40-102 ProMax offers a sturdy build, a well rounded set of features to easily make the cuts you want.(Read Full Review Below)
Bosch RA1181 Benchtop Router Table - Best Value for Money Router Table
The Best Bang for your buck router table in the market. If you're on a budget, then you just can't go wrong with this router table from Bosch.(Read Full Review Below)
Bench Dog 40-001 ProTop (Read amazon Reviews)(Read Full Review Below)
Kreg PRS 2100 (Read amazon Reviews)(Read Full Review Below)
Kreg PRS1045 Precision Router Table System is one of the most precise router tables we’ve reviewed so far. The table is beautifully built and every element is designed to perfection.
Whether you’re just starting out or you’re a seasoned professional routing a complete set of raised panel doors from scratch, this table is a good option to go with.
The instructions were clear and the assembly part was a breeze. The table top comes with pre-drilled holes so you know exactly everything is supposed to fit and it really takes out a lot of guess work.
The fence is made of a fully-enclosed aluminium extrusion which creates a full length vacuum chamber and makes for a great dust collection system.
It’s signature t-square style design make sure that the fence is perfectly aligned with the miter slot and allows you to fully use the miter slot.
Moreover, the fence consists of two individual fence faces which allows you to adjust it perfectly for large workpieces.
The table doesn’t come pre-assembled and you’ll have to put in time to assemble to and make it ready for use. However, that’s a one-time process and Kreg has included pretty detailed manuals and well-packaged elements to make it dead-easy for you to set up the machine yourself.
In conclusion, if you’re looking forward to some serious woodworking projects in the coming year then this table is for you.
BenchDog 40-102 ProMax Cast Iron is one of the sturdiest router table we’ve come across and the credit goes it’s cast iron build.
The table is much heavier than your average table, which minimises vibrations making for a more stable working environment. Despite being a solid table, it is pretty compact and doesn’t take a lot of space, something you’d consider if you have a small workshop.
40-102 ProMax features a good dust collection system and the router plate can be perfectly levelled with the given 10 adjustment points.
The table comes with Benchdog ProFence which uses a cantilevered gripping system to hold the fence in position. The fence is rigid and locks down perfectly.
ProFence is built of solid aluminium and has independent adjustable sub fence faces.
There aren’t a lot of downsides to getting this particular table however there are two. First, the router plate has to be purchased separately and second, it’s a heavy table (cast iron) you will need some help with the mounting.
Bosch RA1181 Benchtop Router Table is the best selling router table on Amazon and it’s all for the right reasons. At this price-point, it becomes really hard to compete with the features and performance that the Bosch RA1181 has to offer.
This bosch router table offers a pretty wide working surface (27-inches by 18-inches to be exact) and an aluminium fence with MDF face plates along with aluminium router mounting plate.
The Bosch RA1181 comes with a set of three mounting-plate insert rings, all router mounting hardware that you’ll need to , dual-outlet 15 Amp switch with overload protection, two adjustable feather-boards, adjustable clear guard, starter pin and guard, and two 1/16-inch fence shims.
It is popular for being compatible with a lot of routers and the dust collection system works just like it should. You can expect a clean working environment while working on it.
However, the one drawback that a lot of users have found a bit disappointing is that the work surface is a little warped and uneven. Even though that shouldn’t be a problem while working as it’s works pretty good at the job its supposed to do, but if that’s something that bothers you then you should probably get another table.
All in all, when it comes to a best value for money router table, nothing beats Bosch RA1181. We’d recommend the Bosch 1617evspk as the best router to go with the Ra1181.
One of the best mid-range router tables out there. the Bench Dog 40-001 Protop comes with a 16-by-22-inch working surface with a plastic laminate top and the Clear acrylic insert is compatible with most routers.
The 40-001 is a pretty good example of a standard benchtop router table and comes with pretty much everything you need to undertake any wood-working project.
This router table is pretty compact in size and is really easy to assemble (15-20 minutes using the manual that comes with the package) and move around your work space.
The one-piece fence is built up of solid aluminium extrusion and doesn’t require any complex installation procedures that come with 2-piece fences.
The accessory T-slots on both table and fence are perfect for installation of featherboards, stops, fencing risers, and changes.
A small drawback of this table is that you’ll have to open the table door to turn it on/off.
To sum it up, this machine is great if you’re not looking forward to spend more on your table but still need a good amount of power and performance from your router table.
A pretty straight froward router table, The Kreg PRS2100 is as basic as it gets.
The PRS2100 features a wide 16″ x 24″ MDF table top and an extruded aluminium fence that gives you a lot of flexibility while working.
The fence isn’t too fancy. However, it does offer two adjustable sides.
The table also features a full-size router insert plate with precision plate levellers.
PRS2100 isn’t really beginner friendly and while it can work well for low-budget router table, you will have to make a lot of adjustments and corrections before you can make the most of it.
There are a lot of factors that go into consideration while reviewing what makes one router table better than the other.
However, there are a few key aspects that we give most importance to and can be a defining factor in whether it is worth purchasing.
Here are the key factors that we take into consideration:
Would the router table work well with your existing routers?
This is one key question that we have to ask because buying a new router just for the lack of compatibility isn’t something all of us can afford to do and that’s where we test routers from different brand on each table to make sure we recommend the one’s that are highly compatible.
We tend to incline towards tables that offer a large space to work on and that the fence allows for us to work with tall workpieces.
There isn’t much of a difference in this metric unless you jump to a different price range. However, we make sure all our recommendations have a good working space.
This one’s important. We run several tests on each of our tables using similar workpieces to test and observe which one’s give us the best results in terms of accuracy, power and flexibility.